Causes of the LED high bay lights death
Time:2015-10-08 Views:2807 Compile:SUNPER
There are some reasons as to why the analysis of the LED high bay lights chip death is very important. Regardless of the kind of the LED high bay light or LED product, the product under use must encounter the phenomenon of LEDs death. Therefore, it is very important to know these problems are analyzed as well as solved by the LED industry professionals. The two main reasons for the LED high bay lights chips include the following.
● The first one is that this problem is usually caused by excessive leakage in the current PN junction failure thereby making the LED high bay lights point off. The best thing about this issue is that it does not affect the general working of the LEDs products.
● The other one is that the internal LED high bay lights connecting lead goes off. This leads to the LEDs death and there is no current production in the LED lights. A situation like this one affects the usual working of the other LED chips. However, there are some ways in which this can be prevented. They include the following.
Static electricity is a great harm to the LED lights. This is because there are so many electrostatics damaging the electronic components in the whole world. This results to tens of millions of dollars in the economic losses. Thus, there is a very important job trying to prevent the electrostatic damage to the electronic components in the electronics industry, LED packaging as well as in the application of the enterprise. If any part has a problem, this may cause damage to the LED products and hence the performance may deteriorate and this may cause total failure.
Since the static electricity may reach 3 volts which is enough to puncture the LED chip, there might be grounding resistance of different forms of equipment in order to meet the requirements. It is also very important to have a grounding resistance of 4 Ohm. However, you might find that in some situations this resistance may reach up to 2 Ohms.
If the human electrostatic damage is great, the work leads to the wearing of the anti-static clothing usually equipped with static rings and electrostatic rings for good grounding. There is also a grounded wrist strap which does not require anti-static effect. Thus, it is recommended not to use the strap in the LED high bay lights.
Some of the manufacturing companies usually use manual welding that uses 40 watts ordinary soldering iron. It is worth noting that the soldering temperature cannot be controlled and that high soldering temperatures may cause death of the LED high bay lights. In order to counter these phenomena, the LED packaging manufacturers ensure that during the production, the LED high bay lights products are produced following a set of strict standard manuals. This helps greatly in preventing the occurrence of any problem during the entire production process. Due to the excessive expansion and contraction of the welding points opened, this leads to the death of the LED high bay lights.
More Posts:
█ The LED chip dissipation of high bay lamps
█ Tips for LED highbays purchasing
█ Main Factors That Determine the lifespan of LED Lightings
How to identify the quality of LED high bays
Next:Importance of Aging Test in LED high bay lightings
User comments
Your current input 0 characters(Reply for at least 6 characters)。
Online Services
Mobile: +86 18938902515 (Mr.Allen)
Tel:+86 755 23159099
Fax:+86 755 61673151
E-mail: sales@sunper.net
zip code: 518108