Impacts of overheating of the LED high bay light

Time：2015-10-21　Views：2581　Compile：SUNPER

LED heat dissipation and chip are just among the most essential parts of the LED high bay light. Therefore, they must be of good quality in order to bring more light-emitting efficiency leading to better lighting effects. Despite heat dissipation being good or bad, it will always directly affect the stability of the LED high bay light as well as its life. So, how can one make the LED high bay lights have a better heat dissipation? The best thing to do is to use the SUNPER technology. It is worth noting the impact of heat dissipation ion the LED light products and below is just some of the main points.

Reduced operating time

The most direct impact occurs due to poor dissipation which reduces the operating time of the LED high bays. Since the LED lights are energy visible lights, the conversion rate cannot be 100 percent when the electrical energy is being converted into light. The excess energy is usually converted into heat energy as according to the law of conservation of energy. If the LED high bay light cooling structure design is not reasonable, this part of heat cannot be ruled out quickly. In addition to this due to the relatively small size of the LED package, the high bay may accumulate a lot of heat thereby leading to reduced life expectancy.

Decline of the quality of materials

The LED lighting products are normally long-term operating. However, some of the materials are oxidized easily with the rise of its temperature. The quality will hence drop due to the repeated high temperature oxidation of the materials. The lifespan will also be shortened. The strength of the material will also be destroyed since because lamps switch and this results to multiple expansion and contraction.

Damaging of the electronic accessories due to much heat causing them to overheat

This is a common problem when it comes to semiconductor heat source. When the LED temperature increases, the electrical resistance also increases and this leads to increase in current. Current increase causes heat rise and this will eventually cause overheating as well as damage to the electronic components caused by the electronic malfunction.

Deformation of the lamp materials due to overheating

The LED high bay light is composed of various components which are used in different parts of different materials. When the temperature rises, some of the materials bend because of heating too much. If the distance between the adjacent parts is small, the two will squeeze and this may seriously damage the components.

Some of the adverse consequences caused by overheating of the LEDs include the following. The entire performance of the LED high bay light degrades, the life expectancy is shortened and many others. These are some of the problems that occur if the heat is not well regulated. Therefore, the cooling technology used in the LEDs is very important. The LED thermal design should be very effective so that to evade the LED heating troubles. The most important thing is to select a good heat dissipation of the LED high bay light when buying. It is very effective not only in the long-term cost savings but also in the course of having the peace of mind.

More Posts

█ How to extend the life of high brightness LED

█ Main Factors That Determine the lifespan of LED Lightings

█ Choose A High Quality LED High Bay Fixture