Main advantages of the SUNPER high bay LED fixtures

Time：2015-09-12　Views：2416　Compile：SUNPER

The characteristic of the high bay LED fixtures on one way is that there is no light diffusing in order to make sure that the light efficiency is good. These fixtures have a special optical design and thus it shines on all the desired area lighting. This further helps to improve the efficiency of light thereby saving more energy.

Despite the current efficiency of the light being 110 to 130lm per watt, there is still a room for improvement since the theoretical value of 250lm per watt is yet to be achieved. The high pressure sodium lamp luminous efficiency is usually increased with the increase in the power. Therefore, the overall efficiency of the luminous LED lights is better than in the high pressure sodium lamp. The theoretical of the overall light efficiency is actually more than 250 watts high pressure sodium light. This is the main advantage for using it.

Another benefit of the SUNPER high bay LED fixtures is that their color rendering index which is commonly abbreviated as CRI is usually higher compared to the HPS lamp. The HPS lamp CRI is only 23 while that of the SUNPER is 75 or even more. From the point of view, for one to effectively achieve the same brightness, the illumination of these LED fixtures you may have to lower the HPS lamp by more than 20 percent. You can understand this better by looking at the British sense lighting standards.

The depreciation of lumens in the high bay LED fixtures is normally less than 3 percent per year. Thus, with 10 years it will reach the applications that use illumination requirements. The HPS lights have declined in the past one year with more than 30 percent and thus the LED high bay lights using the power can be lower compared to that of HPS lamps.

Another advantage is that they use low-voltage devices and have series single LED power of 1 watt. Thus, it is more secure to use a high voltage power supply especially in public places like industrial lighting and factory lighting.

Each of the LED unit can be prepared into different shapes of devices and to match the environment. These fixtures also have long lifespan and they can be used for more than 50,000 hours. Once you buy these fixtures you will be provided with 5 years of quality assurance. There is also high efficiency in the way energy is consumed. The best thing about them is that there is excellent thermal control. The summer temperature is controlled at 45 degrees. There is also passive cooling.

The SUNPER high bay LED fixtures also have the advantage of being highly reliable. The power circuit is used in all the high quality components with each LED device having a separate over-current protection and thus no need to fear any damage. The light color produced is uniform. Lastly, the LED fixtures used do not contain any harmful metallic mercury unlike the metal halide or the high pressure sodium lamps.

More Posts

■ The LED chip dissipation of high bay lamps

■ 100W LED High Bay replace 250W Metal Halide

■ What to Know When Replacing a 400W Metal Halide

■ 6 Years Guarantee For LED High Bay retrofit